Researchers at the Massachusetts Institute of Technology (MIT) have come up with a novel plant-derived 3D printable composite that could pave the way for the sustainable production practices of the future. 

Concocted from a mixture of synthetic plastic and cellulose nanocrystals (CNCs), chains of organic polymers found naturally in plantlife, the material has a highly-reinforced brick-and-mortar structure, akin to that of a mollusk’s inner shell. 

By pushing the CNC content of this composite as high as 90%, the team has managed to fortify it to the point that they say it’s “tougher than some types of bone and harder than typical aluminum.” In doing so, the engineers have also significantly reduced the material’s petrol content, thus it could now unlock the more sustainable 3D printing or casting of parts with as-yet-unseen properties. 

“By creating composites with CNCs at high loading, we can give polymer-based materials mechanical properties they never had before,” says A. John Hart, a Professor of Mechanical Engineering at MIT. “If we can replace some petroleum-based plastic with naturally-derived cellulose, that’s arguably better for the planet as well.”


By integrating high quantities of CNCs into their material, the team were able to provide it with patterns akin to those of a mollusk shell. Image via MIT.

Unlocking the potential of CNCs

Inside every wood cell is a matrix made from cellulose, the natural world’s most abundant polymer, and each of these fibers contains reinforcing CNCs. Even though such CNCs feature polymer chains arranged into crystalline patterns, which at a nanoscale make them stronger than Kevlar, cellulose itself is most commonly turned into paper, or used in the food, cosmetic or textile industries. 

Due to their attractive mechanical properties, a significant amount of research is now being poured into the extraction of CNCs using acid hydrolysis, with the aim of using them to fortify synthetic plastics. According to the MIT team, however, prior researchers have only been able to incorporate low concentrations of cellulose into other materials, as they tend to clump and bond weakly with polymeric molecules.

To overcome these drawbacks, engineers at MIT have therefore formulated a novel material, by mixing CNCs into an epoxy oligomer and photoinitiator, at a ratio that sees them turn into a gel. The idea being, to develop a nano-composite, with a consistency that allows it to be fed through a 3D printing nozzle or poured into a mold to be cast, without having any of the lumps that cause poor plastic cohesion. 

“We basically deconstructed wood, and reconstructed it,” explains Abhinav Rao, PhD, one of the researchers on the project. “We took the best components of wood, which is cellulose nanocrystals, and reconstructed them to achieve a new composite material.”

To showcase the dental applications of their material, the MIT team 3D printed it into a cellulose-based tooth model. Image via MIT.



A tough nanocomposite to crack 

When the MIT researchers examined their new material under a microscope, they found it was characterized by a pattern similar to that of nacre, the tough biomineral which lines the inner side of some mollusk shells. Thanks to its ‘zig-zag’ microstructure, and CNC-loading of up to 90%, the team theorized that their cellulose-based composite could be printed or molded into highly-durable forms. 

In order to test this hypothesis, the engineers went on to feed the gel into a DIW Hyrel 3D Engine SR printer fitted with a pneumatic extruder, which deposited it into 0.5mm-layered parts, before curing, drying and polishing them ahead of testing. 

Interestingly, results showed that the gel shrank upon extrusion by 80%, something the team has attributed to solvent evaporation during initial drying. Yet, between the drying and thermal curing steps, they found the material could be molded with far less shrinkage, and that using a probe sonicator to disperse CNCs into the gel, was also a highly-effective means of unifying them with polymers. 

Similarly, during ‘scratch’ assessments, in which the researchers attempted to deliberately crack their penny-sized prototypes, they discovered they were unable to, due to the way their composite’s cellulose grains were arranged. 

Moving forwards, the engineers believe these strength characteristics, as well as the molding and printing compatibility of their material, could lend it applications in the production of cellulose-based dental implants, or even larger eco-friendly parts, although they add that they’d need to perfect its shrinkage to make this possible. 

“If you could avoid shrinkage, you could keep scaling up, maybe to the meter scale,” adds Rao. “Then, if we were to dream big, we could replace a significant fraction of plastics with cellulose composites.”

Wood-based 3D printing became more commercialized last year after Desktop Metal launched its Forust brand. Photo via Forust.

Emerging wood-based biomaterials

Although wood isn’t currently widely-used within 3D printing, a significant amount of research is now being poured into unlocking their potential as an alternative to petroleum-based polymers. Last year, for instance, a different team from MIT came up with lab-grown wood cells that they theorized could be 3D printed into household furniture. 

Likewise, researchers at the University of Freiburg have also developed a new 3D printable wood-based biomaterial, composed of both lignin and cellulose balls. Designed to address light construction or industrial applications, the team’s plant-laced crystalline polymers have proven capable of forming supramolecular networks in parts, albeit at the expense of the solidity needed for scalable usage. 

Elsewhere, on a more commercial level, Desktop Metal has launched Forust, a wood-based binder jetting brand, focused on turning waste byproducts into end-use components. By mixing sawdust and lignin into a bio-epoxy resin composite, the firm now enables architects, designers and manufacturers to 3D print custom eco-friendly architecture using Desktop Metal systems. 

The researchers’ findings are detailed in their paper titled “Printable, castable, nanocrystalline cellulose-epoxy composites exhibiting hierarchical nacre-like toughening,” which was co-authored by Abhinav Rao, Thibaut Divoux, Crystal E. Owens and A. John Hart.

To stay up to date with the latest 3D printing news, don’t forget to subscribe to the 3D Printing Industry newsletter or follow us on Twitter or liking our page on Facebook.

For a deeper dive into additive manufacturing, you can now subscribe to our Youtube channel, featuring discussion, debriefs, and shots of 3D printing in-action.

Are you looking for a job in the additive manufacturing industry? Visit 3D Printing Jobs for a selection of roles in the industry.

Featured image shows the MIT team’s 3D printed cellulose-based tooth model. Image via MIT.






Author:3D Printing Industry









Trending Articles

Print Industry Prepares for Future of Shorter Print Runs, New Technology: Smithers

Print Industry Prepares for Future of Shorter Print Runs, New Technology: Smithers

on 04 September 2021 in News

There will be more investment in digital (inkjet and toner) presses by print service providers (PSPs). A defining factor for ...

Read More
Flint Group Announces Launch of Flint Offset Packaging Solutions

Flint Group Announces Launch of Flint Offset Packaging Solutions

on 12 October 2021 in News

New division includes sheetfed inks, pressroom chemicals and printing blankets.        Flint Group announced the launch of Flint Offset Packaging Solutions ( ...

Read More
Mimaki unveils new flatbeds and leather printer

Mimaki unveils new flatbeds and leather printer

on 14 May 2021 in News

Mimaki has used its Virtual.Drupa presence to unveil two new LED-UV large-format flatbed inkjet printers and a new machine ...

Read More
Build a 3D home? Florida could be a prime market to click ‘print’

Build a 3D home? Florida could be a prime market to click ‘print’

on 09 August 2021 in News

Mighty Buildings production manager Yonah Naftaly shows a machine that fills 3D-printed wall panels with insulating foam on Wednesday, March 17, 2021, ...

Read More


¡El Buen Fin de Pantone llegó lleno de color!

¡El Buen Fin de Pantone llegó lleno de color!

on 20 November 2022 in Advertising

¡El Buen Fin de Pantone llegó lleno de color!     Este Buen Fin encuentra las herramientas más deseadas para especificar ...

Read More
PRINTING United announce recipients of sustainability awards

PRINTING United announce recipients of sustainability awards

on 03 May 2021 in News D

PRINTING United Alliance celebrated Earth Day 2021 by recognizing the recipients of its annual Sustainable Business Recognition Awards Program.   Member companies ...

Read More
PRINTING United Alliance Announces Safety Recognition Program Award Recipients

PRINTING United Alliance Announces Safety Recognition Program Award Recipients

on 07 April 2021 in News D

PRINTING United Alliance today announced the recipients of its annual Safety Recognition Program Award for safety efforts put into place ...

Read More

Featured Articles